长沙安规电容工厂1.0uF MPX x2 105k|钽质长沙陶瓷电容|长沙独石电容批发器|长沙陶瓷电容厂家-

您的位置: 首页 -> 产品中心

安规电容1.0uF MPX x2 105k

[ 上一个：长沙安规电容0.47uF MPX x2 474k ]　 [ 查看原图 ]　 [ 下一个：长沙安规电容JD102M Y1 ]

详情说明 / Details

TYPE:MPX

FOR INTERFERENCE SUPPRESSION CLASS X2,

AND ACROSS-THE-LINE CAPACITORS.

DESCRIPTION:

MEET STANDARDS OF:VDE，ENEC，CE，UL，CSA，CQC，KC

ELECTRICAL CHARACTERISTICS:

1.Operating temperature

: -40°C ~ +110°C

2.Capacitance range

: 0.001uF ~ 1.0uF

3.Capacitance tolerance

:K=±10%,M=±20%

4.Rated voltage(RV)

: 275VAC 50Hz~60Hz

5.Dissipation factor(DF)

: 0.1% max at 1KHz 25°C

6.Testing voltage(TV)

: 1200 V of RV for 60 sec

7.Insuation resistance(IR)

: C ≤0.33uF , IR≥15000MΩ

(measured at RV or 500Vdc

C 〉0.33uF ,IR≥5000MΩ/ uF

whichever is smaller,at 25°C)

DIMENSIONS (UNIT:MM)

CODE	MDF	250/275VAC
CODE	MDF	W	H	T	P(±1.0)	d(±0.05)	STYLE
102-223	0.001-0.022	12.0	11.0	5.0	10.0	0.6	A
103	0.01	18.0	11.0	5.0	15.0	0.8	A
123	0.012	18.0	11.0	5.0	15.0	0.8	A
223	0.022	18.0	11.0	5.0	15.0	0.8	A
273	0.027	18.0	11.0	5.0	15.0	0.8	A
333	0.033	18.0	11.0	5.0	15.0	0.8	A
393	0.039	18.0	11.0	5.0	15.0	0.8	A
473	0.047	18.0	11.0	5.0	15.0	0.8	A
563	0.056	18.0	11.0	5.0	15.0	0.8	A
683	0.068	18.0	11.0	5.0	15.0	0.8	A
823	0.082	18.0	12.0	6.0	15.0	0.8	A
104	0.1	13.0	12.0	6.0	10.0	0.8	A
104	0.1	18.0	12.0	6.0	15.0	0.8	A
154	0.15	18.0	14.5	8.5	15.0	0.8	A
184	0.18	18.0	14.5	8.5	15.0	0.8	A
224	0.22	18.0	14.5	8.5	15.0	0.8	A
224	0.22	26.5	16.5	7.0	22.5	0.8	A
274	0.27	26.5	17.0	8.5	22.5	0.8	A
334	0.33	18.0	15.5	9.5	15.0	0.8	A
334	0.33	26.5	17.0	8.5	22.5	0.8	A
394	0.39	26.5	19.0	10.0	22.5	0.8	A
474	0.47	18.0	19.0	10.5	15.0	0.8	A
474	0.47	26.5	19.0	10.0	22.5	0.8	A
564	0.56	32.0	20.0	11.0	27.5	0.8	A
684	0.68	32.0	20.0	11.0	27.5	0.8	A
824	0.82	32.0	22.0	13.0	27.5	0.8	A
105	1.0	17.0	11.5	19.5	15.0	0.8	A
105	1.0	32.0	22.0	13.0	27.5	0.8	A
105	1.0	32.5	25.0	16.0	27.5	0.8	A

APPLICATION FOR APPROVAL
1.Item: Metallized Polypropylene Capacitor
2.Type: MPX Series.
3.Specification.
a.Temperature Range -40°C ~ +110°C
b.Capacitance. 0.001uF~1.0uF
c.Capacitance Tolerance. K(±10%)M(±20%)
d.R.V. 275VAC
e.Dimension. Refer to standard product list (Attached Pages).
4.Performance Test
ARTICLE	APPLICATION	PERFORMANCE	TEST METHOD
1	Appearance	No defect	Eye measurement or by
			dial gauge
		(Between terminals)	Add a D.C.test Voltage
		No defect,Self healable breakdown	of 1200 V rated W.V for
		is not counted	60 sec
2	Dielectric strength		The initial changing and
			discharging currents at
			testing voltage shall not
			exceed 1A
		Between body and terminal	Add a D.C.test Voltage
		no defect	of 1200V rated W.V.for
			60sec
			Test voltage:
		C≤0.33uF :15000MΩ MIN
			275VAC for rated voltage 275VAC
	Insulation	C〉0.33uF :5000MΩ.uf MIN
3	Resistance




4	Capacitance	Within the Specification.	Measured with frequency
5	Dissipation Factor	The tangent of loss amgle:≤0.1%	1KHZ and 25°C

APPLICATION FOR APPROVAL
ARTICLE	APPLICATION	PERFORMANCE	TEST METHOD
6	Tensile strength	1)No visible damage	Tensile strength:load:1.0kg.
		2)No breaking or looseing of	Duration of load application:
		terminal	60±5sec.
			Bending strength:load:0.5kg.
			The number of testing time:twice
		1)No open and short circuit	Variable frequency cycle:
7	Vibration	happened .	10~55~10Hz/min
		2)No damage in element junction	Amplitude 1.5 mm;Direction
		and appearance	x,y,z;each direction 2 hours.
		At least 75% of the circumference	Solder temperature:245±5℃
8	Solderability	of the immersed shall be covered	Dipping time:2±0.5 sec
		with new solder.	Dipping depth:2±0.8mm from
			the root of the terminal.
		1)No visible damage;	In 260±5°C solder bath
9	Resistance to	2)Capacitance change:within ±5%	for 5 sec
	solding heat	of initial value.
		1)Capacitance change:ΔC/C≤5%;	Test in constant thermostatic
10	Heat resistance	2)The tangent of loss angle:	oven after 2 hours deposit
		changed within 150% of initial	reached temperatureequilibrum
		value at 1Khz	85±2℃ thermostatic oven.
		3)IR≥30% of initial value
		1)Capacitance change:ΔC/C≤5%;	Test in constant thermostatic
11	Cold resistance	2)The tangent of loss angle:	after 2 hours deposit
		changed within 150% of initial	reached temperature equilibrum
		value at 1Khz	-40±2℃ thermostatic oven.
		1）Appearance: no defect;	Temp.:40°C;
12	Moisture resistance	2）Test voltage:No defect,self	Humidity:R.H 90%-95%
		healable ability is not destoryed;	Add W.V for 240±8 hours
		3）Insulation resistance:≥30% of	then keep the room temp.
		initial value;	10 hours.
		4）The tangent of loss angle:change
		within 150% of initial value;
		5）Cap,change: ΔC/C≤5%
		1)Appearance:no defect;	Add 140% of W.V.
13	Moisture	2)Insulation resistance:≥50%	85±3°C in Chamber for
	resistance	of initial value;	then keep .Under standerd
	loading	3)The tangent of loss angle:	1000H condition 2 hours.
		4)change within 150% of initial
		value;Cap,change: ΔC/C≤5%

DATE

DAIN MARKING STANDARD

NO.

2006

DAIN-102

一.MARKING

EXAMPLE

2 3 4

EXAMPLE 1

二.INDICATION

1.TYPE:

MPX

2.CAPACITANCE:

EXAMPLE: 104=100000PF(0.1uF)

3.CAPACITANCE TOLERANCE:

K=±10%

4.RATED VOLTAGE(VAC): 275VAC

5.MEET STANDARDS OF: VDE，ENEC，CE，UL，CSA，CQC，KC

三.PRINTING INK: BLACK COLOR

欢迎访问智中电子有限公司官方网站!公司专注:长沙电容器 长沙陶瓷电容器 长沙安规电容 长沙独石电容 长沙压敏电容

欢迎访问智中电子有限公司官方网站!公司专注:长沙电容器长沙陶瓷电容器长沙安规电容长沙独石电容长沙压敏电容